Projet CH-601HD
	$US	$CDN
Livres	244.32	393.95
13.11.98	79.42	134.88	Books (Sheet Metal, 2 first T. Bingelis)
06.11.98	24.95	44.10	Choosing your Homebuilt
99.03	85.00	130.05	Zenair Newsletters
99.08.01	22.00	33.88	Firewall Forward (T.Bingelis)
99.09.30	20.95	31.84	Keeping your Subaru Alive
01.04.23	12.00	19.20	Chilton Subaru Maintenance Manual
Outils	2,346.08	3,580.37
03.04.17	113.33	170.00	Timing light
01.10.01	94.12	150.59	HVLP Paint gun (Arslan) from Custeau Peinture
01.09.23	55.00	88.00	Torque wrench purchased on eBay
98.11	57.05	89.00	Dremel kit
98.11.07	147.46	230.04	Press drill
98.12.04	16.91	26.39	Hand riveter
98.12.04	58.98	92.01	Ribbon Sander
98.12.04	147.46	230.04	Band saw
98.12.06	40.03	62.44	Table (wood and parts) for electric tools
99.02.26	24.48	36.96	Router bits, file, aluminium rule
99.02.28	93.61	141.35	Router, drill bits, "plomb de ligne"
99.02.28	9.42	14.23	Drawing tools
99.02.28	30.83	46.55	Hole cutter and vise grip (to make flanging tool)
99.03.01	77.34	116.78	Pneumatic riveter and accessories
99.03.05	76.50	117.81	Files, deburring tools, drill bits
99.03.07	(12.40)	(19.09)	Returned flow regulator
99.03.07	(18.18)	(27.99)	Returned Canadian Tire hole cutter due to bad quality
99.03.07	83.83	129.10	Pressure regulator, hole cutter, vise grips, bolts and nuts.
99.03.12	52.98	80.00	Hydraulic press (parts)
99.03.20	64.07	98.03	Material for 4 foot bending brake (including plans from Carlos Sa)
99.03.20	25.99	39.76	Aluminium snips
99.03.21	56.37	86.25	Torque wrench
99.03.26	16.34	25.00	Material for hydraulic press
99.04.01	7.56	11.49	Router bit for repairing nose rib form block
99.04.03	37.33	56.74	48" level, masonite and bolts+nuts, screws for reparing wing nose ribs
99.04.07	33.97	51.63	Hand seamer and scotch brite (2)
99.04.08	19.31	29.35	Two small vise grips
99.04.12	7.24	11.00	High speed cutter (ball shaped, Dremel model 114) for modifying riveter heads.
99.04.18	98.68	150.00	Work table material
99.04.23	144.21	216.32	Clecos (125A4, 100A5), spacing tool, cleco pliers
99.08.01	46.00	70.84	Misc. tools purchased at Oshkosh 99 (no receipt.  Wire twister, foot #30 drill bit, 25 clecoes, 2 clecoe vises, ear muff)
99.08.18	25.62	38.94	Straight edge for cutting and others
99.08.28	14.37	21.56	Square and duct tape
99.09.26	49.15	73.72	Hole saws and vise grips (receipt 125.33-credit note)
99.10.31	53.55	80.33	Quick Grip, sand paper+others
99.12.17	39.64	59.46
00.01.30	10.19	14.88	Tooling rod with nuts for nose ribs alignment.
00.01.26	48.36	70.61	Material for nose skin bending press.
00.03.26	14.45	21.09	Tooling rod with nuts for nose ribs alignment. + a few 2X3's and 2X4's for wing support.
00.02.02	5.83	8.51	Material for bearing flanging tool (for baggage compartment flange)
00.04.01	108.08	162.12	Straps, Dremel tools, drill bits, Unibit
00.02.02	9.73	14.59	Bearings for bearing flanging tool
99.09.13	57.81	86.72	Saw and storage box and drill bits
00.07.29	82.00	123.00	Rivet Squeezer and safety wire (receipt 55US)
00.07.30	20.00	30.00	Dimple dies (3/32 and 1/8)
00.11.11	8.75	13.13	Threaded rod (for tooling rod for holding ribs), hole saw, standard nuts
00.12.22	46.56	69.84	Sandblast kit, one foot drill bit (3/16"), engine cleaning nozzle
01.01.06	10.87	16.31	Hole saw, washers (20 cents)
01.05.14	8.89	14.05	Chip chaser bought on eBay from Claer Air (818-775-1650
01.07.28	26.40	40.92	Hole finder et dimple tool (partie de mes achats à Oshkosh)… le reste est dans pieces et instruments.
Matériaux	9,279.73	14,184.94
98.11.23	175.00	280.52	Plans from Peter Ferguson (sn: 6-3425)
99.02.24	93.70	141.48	1 sheet 6061-T6 from Ideal Metal
99.03.20	264.33	404.43	1 0.016, 2 0.025 et 1 0.040 (from Aero Letourneau)
99.03.20	5.63	8.61	6061T6 0.125 6"X12" from Metal Supermarket
99.04.01	389.45	591.96	Fairings (tail $32.66, wing tips $92.64), MAC-S4A $282.60, rudder tail light $76.54, s&h & tax $37.62+38.72)
99.03.31	80.57	122.46	Rivets Advel Avex 1000-1/8 et 1000-5/32
99.04.23	51.58	77.37	Piano hinge MS20257P4-6 (4)
99.04.24	134.68	204.72	6061-T6 0.016"-12' (1) 0.032"-12' (1)
99.04.24	183.70	279.22	6061-T6 0.016"-12' (2) 0.025"-12' (1)
99.08.28	98.89	150.32	6061-T6 0.040 1/2 sheet+3 L angles
99.08.29	11.21	17.04	Solder bars (2) + wood pieces
99.09.11	24.00	36.48	Solid rivets for spars
99.09.18	212.65	316.85	6061-T6 0.025"-12' (2) 2.9sqft of 0.125", 1-1/2"X1/8" 20feet (2)
99.09.30	152.85	229.27	Various parts from Wag Aero (Invoice 520-242).  Bolts, fuel tank fittings and caps, finger screen
99.09.30	27.64	41.46	UHMW PE 1/4" 1'X4' from US Plastic Corp
99.10.16	48.16	72.24	6061-T6 0.190" (1'X1'), AD6 rivets, 1 AN5 bolt+nut
99.10.19	41.41	62.11	5052-H32 0.040" (4'X8') for fuel tanks
99.11.10	252.60	373.85	Rivets 4500 A4, 2000 A5, 100 A6
99.11.04	36.67	55.00	Various parts from Reid Tool (tie-down ring, vibration mount, riv nuts, foam grips)
99.11.27	195.23	292.85	6061-T6 0.016"-12' (2) 0.025"-12' (1), tube 1/4" X 4' for pitot/static
99.12.18	4.39	6.58	Polyethylene tubing for Pitot/Static ports (35 feet)
99.12.18	192.28	288.42	6061-T6 0.016"-12' (2) 0.025"-12' (1)
99.12.27	66.67	100.00	Wiring: 50' 16awg, 150' 18awg, 150' 20awg, 50' 12awg, 100' 20awg (3 wires shielded cable), 35' 22awg (5 wires), 45' 18awg (3 cond. shielded, pvc).  All aviation wire/cable (except last one).  Surplus originated from aircraft manufacturer, paid cash.
99.12.17	450.73	676.09	Wicks Aircraft.  Various parts and tools.   Got Usher flush fuel caps, bolts, nuts, nutplates, clecoes, fuel tubing, Dzus, etc...
99.12.28	180.64	265.54	Wicks Aircraft. Various parts (mostly nuts and bolts) + some tools (countersunk and foot long dril bits)
00.01.08	14.00	21.00	Wiring: 100' #16, 12' #8
00.01.23	12.20	17.94	Tie-wraps, cable clamps…
00.03.18	78.05	114.74	6061-T6 0.025" 4X12 (invoice 408543)
00.03.28	156.09	234.14	Acier 4130N pour controles
00.03.28	160.00	240.00	Acier 4130N pour Rejean Houles afin qu'il coupe, assemble et soude mes contrôles.
00.04.19	588.63	882.95	Various parts from AS&S.  Including MAC S4, Whelen A650s, AN fittings, MS21919 clamps, screws, DZUSs…
00.05.06	57.23	85.84	Various parts, includind a crimper ratchet (tool at 40$CDN)
00.06.24	50.00	75.00	Cessna 150 pedals (used, no receipt)
00.05.07	5.89	8.84	SS Screws.
00.06.16	27.23	40.84	Cork from Auto Value
00.10.07	22.75	34.13	Extrusion 3/4X3/4X1/8, 20 feet. 1 foot tube 4130 1/4X035
00.10.28	44.33	66.49	4130 1/8" sheet, 6061-T6 1/8" sheet and some bolts
00.12.02	6.73	10.09	Returned 4130 steel sheet and bought steel tubing.
00.12.16	76.31	114.46	6061-T6 0.025" 4X12 (invoice 612021)
00.12.21	755.34	1,148.11	Misc. Materials from Aircraft Spruce (control cables, nuts and bolts, Whelen strobe tail light-a500a, tires and tubes, rod end bearings, turnbuckles, MS21919 clamps, brake lines and more)
01.02.10	129.77	195.95	6061-T6 0.025" and 0.016" (one of each 4'X12')
01.03.02	70.60	112.96	6061-T6 0.025".  Plate of 0.050" 4130. Tube 1-1/8" X 0.035" 3130. 3/4X3/4/1/8 20-foot extrusion, AN6-7A bolts
01.06.17	203.99	312.10	3 sheets 601-T6 0.016".  100 AD 41-43 rivets
01.09.22	12.90	20.00	13.30 for nuts and bolts for the engine mount.  (AN-23A). I gave the change to thank for tack welding the bolts.
01.07.28	10.66	16.52	Bolts, nutplates (partie d'achats à Oshkosh 2001). Le reste dans outils et instruments)
01.11.02	663.85	1,056.18	Aircraft wheels.  These are the Matco F602 and NW602 wheels accomodating 15X6.00X6 tires. From Aircraft Spruce, invoice no 471416
01.10.05	911.94	1,440.86	Misc parts.   ELT and CI291 substracted from invoice amount. From Aircraft Spruce, invoice no 458804. Bolts, turnbuckles, master cyl, fittings, parking brake valve, push-pulls, gascolator, seat belts, SS cable&accessories, insulation material, throttle knobs and other small fittings and parts.
01.11.	29.06	46.49	Electrical wiring and connectors from Master Vox… and I'm affraid I did not buy the right shielded cables!
01.10.16	190.25	304.40	Cabin vent system, panel light dimmer, ignition switch, buss bars (from Van's Aircraft, invoice no 25154)
02.02.04	433.64	697.17	Parts from Aircraft spruce. Includes several electrical components. Invoice 737159  Some parts on invoice for a friend.
03.02.02	94.94	150.00	Pieces 4130 de bras de canopy
03.02.13	81.46	128.70	1000 A4 et 1000A5 rivets
03.02.23	15.82	25.00	Boulons et rods
03.03.02	7.24	11.00	Plywood pour dos de siege
03.03.13	32.67	49.00	Misc parts for engine and elect. Installs
03.04.08	66.67	100.00	Misc parts from aircraft spruce
03.04.19	53.33	80.00	Seat covers
03.04.22	218.00	327.00	Material for Cowling from Plasto HL Industries.  Bought 6oz fiberglass, 2 gals of epoxy and PVA.
03.05.05	262.76	381.00	Canopy
03.06.27	16.67	25.00	Cables and springs for canopy locking system
03.7.11	10.00	15.00	Fiberglass+fax
03.07.14	65.33	98.00	Fiberglass, baffle material, extincteur
03.08.04	108.27	162.41	Southco
03.07.31	119.33	179.00	Extinguisher, plate nuts, bolts (from Osh)
03.08.14	41.17	61.75	1000 rivets a4
Matériel de remplacement	176.06	263.75
99.07.02	50.00	75.00	6061-T6 0.016-12' (1)
00.12.01	19.61	30.00	Extrusion 1-1/2X1-1/2X1/8, 8 feet
01.01.06	30.00	40.00	6061-T6 0.032" 4'X4'
01.12.09	52.50	84.00	6061-T6 0.020
02.01.05	6.09	9.75	AN6-25A engine mount bolts for new engine mount
03.08.12	17.86	25.00	New exhaust flange and gaskets (include tack weld of 15$)
Instruments, Avionics, Electrics	7,990.98	12,504.01
03.03.29	14.00	21.00	Connecteurs (master vox)
03.02.26	3.14	5.00	Connectors (Master Vox
03.02.24	72.33	115.00	Ign wires, + fittings
02.10.17	1,084.38	1,724.17	GPS-196 (Garmin)
02.10.28	1,664.27	2,646.20	Becker 4401-175 transponder (+ some small parts)
02.01.29	82.92	132.67	Fuse blocs from JC Whitney (2 6-fuses, 1 10-fuses and 1 14-fuses).
02.02.02	39.84	63.75	15 feet of 4AWG aviation cable for battery cable
02.01.29	72.64	116.23	4AWG welding cable for battery cables (25 feet red and 15 feet black… I think I'll have plenty!)
02.01.28	12.94	20.70	Misc from Master Vox
01.10.26	870.00	1,392.00	Apollo SL-40 Comm from eBay
01.10.05	102.41	161.80	ELT AK-450 and VHF antenna CI-291
00.01.07	114.91	172.37	Fuel Sender VDO 226007 (S-W: 240-33ohms).  Fuel gauge VDO 301029
00.06.23	38.33	57.50	Gauge VDO 301029 (note gauge not identical to previous one :(
00.05.02	121.50	182.25	Kollsman Altimeter
99.12.17	22.24	33.36	GE4509 Landing/taxi lights (purchased from Pieces d'Auto Super Inc.)
01.03.23	429.06	677.91	AT-3000 encoder, Antenna, Install Kit (I had purchased the TRT-250D transponder but sold it on eBay)
01.03.30	23.15	35.88	Switches from MasterVox
01.03.30	12.66	20.00	Audio connectors (no receipt)
01.07.24	1,663.71	2,545.48	Navaid Devices Single Axis Autopilot
01.07.28	1,226.76	1,901.48	Eclairage instruments UMA, VSI, airspeed, EIS (Advanced, water cooled), 3 fuel pumps 40108 (achats Oshkosh 2001, reste dans outils et materiaux,,, prix approximatif a cause des taxes --compte dans le prix ci-contre).
99.11.16	39.77	59.26	Whelen A555 tail light (purchased from Freewing on e-Bay)
00.07.29	280.00	420.00	Strobe Power Supply (receipt 200US)
Moteur	5,813.89	9,104.47
03.08.06	64.29	90.00	Oil cooler hose and fittings + some fuel hose clamps
03.05.08	13.33	20.00	Welding of the carb heat muff on exhaust.
03.05	103.00	154.50	Oil cooler and sandwhich adapter.  Cost also include a battery disconnect that I'm giving to someone who helped me
03.04.29	133.33	200.00	Exhaust system
03.04.20	40.00	60.00	Rented mold for cowling
03.04.19	32.00	48.00	Replacement intake manifold (and throttle body)
03.04.18	123.33	185.00	Welding on the manifold I received from D. Johnson
03.04.13	20.00	30.00	Prestone, water, screws, aviation gasket, oil pan plug ring.
	13.33	20.00	had my radiator cap assembly modified (shortened the tubes)
03.04.02	18.67	28.00	Carb heat hose, SAE 30 (no detergent) oil, 5/16-1/4 fitting.
03.03.01	711.00	1,080.89	Warp Drive propeller standard blades, HP Hub with SAE-1 bolt pattern
03.02.26	182.09	278.60	Carburateur Holley 5200 (Autoline part no. C-7412) de Ford Mustang II 2.3L Std 1982
03.02.20	120.92	185.00	Spinner from UHS Spinners with Faceplate
03.02.19	27.04	43.00	Shipping for redrive back to D. Johnson
03.02.18	3.14	5.00	Dowel pins pour reduction drive.  J'ai acheté 4 sets de différentes dimensions.
03.02.17	11.08	17.61	Bolts pour  engine mount et accessoires de moteur
03.02.15	3.77	6.00	Colle et bolts
03.02.14	66.04	105.00	Alternator rebuild. Had the alternator rebuilt by St-Hubert Auto-Electric on 1ere rue
03.02.14	37.74	60.00	Alternator & Water overflow tank from scrapyard. I took the alternator from a Pontiac Firefly 1988.  It is a 55AMP Nippodenso alternator.  The overflow tank is from a Honda Civic 1991 or 1990.
03.01.28	69.89	110.42	New water pump from Subaru (part no 21110AA060)
03.01.11	16.51	26.09	Capacitors for ignition coils, NAPA part no RC1
02.12.30	232.58	367.48	Ignition coils (IC 107), ignition control modules (TP45) and a radiator hose (21608).
02.12.31	14.80	23.38	Radiator hose (no. 22271).  Permatex thread sealant.
02.02.20	93.91	140.86	Subaru main bearing set (Subaru part no 485437000)
02.02.09	243.13	389.00	Rebuild of cylinder heads.  During valve job, replaced four exhaust valve guides, two-angle cut on all valves, three-angle cut on valve seats, repaired two exhaust studs.
02.02.08	106.25	170.00	Due shipping and renewed engine bolt kit.
02.02.02	379.98	607.96	Engine work from AMB Engines
02.02.03	(312.50)	(500.00)	Returned the cylinder heads and decided to have my own set of heads rebuilt
01.11.13	390.32	605.00	Ported cylinder heads + shaved 0.040"
01.05.23	1,889.06	3,022.50	Reduction drive and engine mount (count 80$ shipping)
01.10.05	34.95	55.92	Heater control valve
01.10.11	270.74	433.18	Pistons, rod+main bearings, oil pump from NAPA, invoice no 047-10-01765
01.10.17	0.93	1.49	Oil pump gasket and oring
01.xx.xx	62.50	100.00	EA-81 Core from Gilbert Martel (another 1983 engine with hydraulic lifters)
99.06.28	201.34	300.00	EA-81 (1983) Car: JF1AM43B5DC415290
01.04.26	43.48	67.39	Starter (eBay auction)
01.04.10	40.37	64.19	Head gasket set (eBay auction)
01.04.06	87.16	138.59	Gasket set (eBay auction)
01.07			Water pump (eBay auction)
01.07			Nippodenso distributor (eBay Auction)
01.10.06	44.58	71.32	Ford Festiva 1993 heater core
02.01.07	179.82	293.10	Cam shaft from Deltacam (profile 252H) with new lifters
Produits corosion+peinture	195.23	301.90
03.03.03	21.05	32.00	Lacquer thinner and primer
01.10.01	82.84	132.54	MP170 Epoxy primer and MOA paint for cabin.  (Paint gun counted under "Tools")
99.04.07	7.78	11.83
99.04.23	5.29	8.04
99.06.22	10.58	16.08
99.08.06	11.48	17.57
00.01.09	16.30	24.12
00.03.18	7.15	10.58	Lacquer thinner and Automotive Goop
00.06.21	14.77	22.16	Acetone, lacquer thinner, primer (receipt 56.97)
00.07.31	17.99	26.98	Body repair materials (for filling some deformations in fuel tanks), acetone, liquid aluminium (receipt 55.72)
Produits consommables	587.41	884.33
99.08.28	72.53	110.25	Drill bits, file and sand paper
99.09.11	13.65	20.75	Drill bits and sand paper
99.11.27	9.93	14.89	Drill bits and sand paper
99.12.17	8.73	13.10	Sharpie pens
00.03.18	28.50	41.61	Drill bits and Sand paper
00.12.02	12.51	18.76	Sand paper + centre drill bit
01.04.20	30.36	47.97	Drill bits
03.03.04	9.87	15.00	Tap and drill bits
03.03.14	41.33	62.00	Soap, towels, lighter for propane etc
03.06.20	26.67	40.00	Towels, acetone,…
03.06	333.33	500.00	To account for all the things I did'nt care to write as I purchased materials (drill bits, sand paper, cleaners, primers, etc
Services	991.61	1,515.00
99.??.??	133.33	200.00	Riveting of spars
00.06.11	200.00	300.00	Fuel tank welding
00.12.05	106.67	160.00	Repairs for landing gear legs and modification of control yoke (modular)
01.03.23	48.39	75.00	Welding of pedals and torque tube
01.04.01	38.71	60.00	Welding of engine mount fittings, pushrods and changed bolts on nose gear leg (also made threads on rods).
01.10	6.45	10.00	Tack bolts to engine mount fiddings.
01.12.10	387.10	600.00	Installation of wheels on wheel forks
03.02.05	70.97	110.00	Welding for canopy arms and parts
Total	27,449.25	42,468.98
Total minus Books and Tools	24,858.85	38,494.65
00.11.06		352.01	David Clark HD10-13S (eBay auction)
00.08.15		382.92	David Clark HD10-13S (eBay auction)